Metalware Production

In metalware production, supreme-quality materials are used to make a container that ensures reliable operation in harsh climatic conditions and on open-air sites.

Thanks to the container the normal temperature is able to be maintained even under low or elevated temperature conditions which guarantees the start of the power station engine and provides uninterrupted operation of its additional equipment.
The functions of the power plant container are:
  • Ensuring temperature operation
  • Noise insulation
  • Ensuring high mobility and safety of operation of an autonomous source of electrical energy
  • Increase of the equipment’s time service 

In metalware production ZVEZDA-ENERGOCOMPLEX takes each of those factors into consideration, our products meet the most stringent requirements in the industry, which is confirmed by certificates and licenses for all types of operations performed.
A power plant container consists of the following components:
dnishe.JPG The floor is a frame-type heat-insulated metal structure made of rolled sections. The frame meets the enforcement requirements and has all structural assemblies necessary to mount the power unit. The container floor has troughs to remove spilt technical fluids.
krisha.JPG The roof is a trapezoid, which allows the power plant to be transported by railroad. The roof has an opening for installation/deinstallation of a genset. On the roof, external power plant parts are installed — silencers, cooling units, recovery boilers, external lines of cooling and disposal system. The roof is heat-insulated according to fire resistance and heat insulation requirement. The roof structure ensures operation in all climates of the country due to draining and resistance to snow loads.
kont.JPG The container — the power plant walls are made of corrugated plates reinforcing the container. At the customer’s request and to comply with the operating regulations, doorways, air intakes and outlets, passages for fuel, oil, coolant, water heating system and recovery system are installed. The container heating ensures that with outside temperatures up to -40ºС, the temperature inside the power plant is as stipulated by the technical regulations.
rami.JPG Equipment mounting hardware. Fixtures (frames, supports, brackets) necessary to mount the equipment inside the power plant and supplementary modules. These elements ensure reliable mounting both for stationary assembly and for transportation.